 |
| Gap and Flush Measuring System |
With the help of the measuring instrument for the
measurement of the third dimension, GapGun can quickly and accurately determine
the measurement of space and length between two surfaces in just a few seconds.
In addition to the speed of gap measurement tools,
the GapGun is fully portable and non-contact, making it an ideal solution for
online inspection of the production line, whether mounted by hand or with a
robot.
 |
| Gap and Flush Inspection |
The groundbreaking, state-of-the-art GapGun Edge Break +
system ensures accurate chamfering and spoke inspection on the work floor.
GapGun PRO represents something simpler, but also the most technologically
advanced and reliable, as a result of a development that has been achieved during
years of daily use and the process control phases.
Gap and Flush Inspection analyzes can be performed on
vehicles to check that doors, covers, cover plates and lift doors are not
properly aligned. It can also be used to control excessive wind noise and
detect water leaks.
Inspection of gaps between doors and mounted vehicle bodies
is a decisive factor in modeling the aerodynamic performance of a car and in
turn determines its energy efficiency. The portable laser scanner is an
effective solution because, for example, it scans the entire spine between the
bonnet and the front fender. Visual inspection reports with color coding
illustrate graphically how colors and holes move along the spinal column. The
Cross-Scanner is the most suitable sensor for inspecting openings and openings
of motor vehicles. Because multiple lasers scan simultaneously, there is no
reorientation of the probe to measure this complex and crucial geometry. Only
one scan path can be defined to keep track of the 3D curvature of the room, and
the cross scanner automatically collects the data.
Some Topics
on Metrology products and Services Previous Blog Post
| ReverseEngineeringServices |
No comments:
Post a Comment